Mouse over for menu items
Call us at 1-800-238-2811 for antennas or repeaters
Tutorial Section about improving reception
Learn how to improve and boost Verizon, AT&T, Cingular and Sprint/Nextel reception here in our learning center - tutorial

Cellular Frequencies and Bands in use Today

Repeater Section

Start

Basic Installation

Donor Antennas

Coverage Antennas

Other Issues

Repeater
Differences

Repeater FAQ's

Antenna Section

Index

Basics

Bands and
Frequencies

Gain

Home and
Office

Vehicle
Reception

Pointing an
Antenna

Finding Your
Frequency

Frequently Asked
Questions

Please Note: This page is particularly important for understanding how the frequencies of cellular systems work and how the carriers use these frequencies. It also provides a good overview of how cellular systems are structured. Please read carefully and thoroughly, we think you'll learn a lot!

Bands and Frequencies

There are only two systems in the US in use in today's cellular system. Regardless of the terminology (aka; Modes) used to characterize cellular technology (PCS, TDMA, CDMA, GSM, GPRS, Cellular, Digital, Analog, etc.), at this time there are only two frequency ranges (aka; Bands) available to US carriers. ( Nextel users go here )

(1) 824-896 MHz   commonly termed 800 MegaHertz (may also be known as 850MHz)

(2) 1850MHz-1990MHz   commonly termed 1900 MegaHertz or 1.9 GigaHertz

For simplicity's sake we will stick to the terms 800 MegaHertz and 1900 MegaHertz . MegaHertz is abbreviated as MHz .

Some cellular carriers are using only one of these frequency ranges and many use both . To utilize both frequency ranges they have contracted with the cellular phone manufacturers to design phones that are capable of these two bands . This is where the term "Dual Band" comes from. As an example, the Nokia 6160 is a Dual Band Phone . (Note: remember that the frequencies are also known as bands )

Dual Band - Tri Mode and Tri-Band Phones

Before we go too far, it must be further explained that the frequencies(bands) that your phone can use have nothing to do with the Modes . Modes refers to the technology being used in those frequencies. These modes include Analog, Digital, TDMA, CDMA, GSM, etc. The modes of a cellular phone do not effect the antennas that your phone can use as all antennas are tuned to frequencies(bands) and not modes . The actual definition of a Dual Band-Tri Mode Phone - 800MHz Analog, 800MHz Digital and 1900MHz Digital. Two Bands and Three Modes .

New Tri-Band Phones utilize 900MHz, 1800MHz and 1900MHz frequencies. Seems like you're getting quite a GREAT deal, Right? Afterall, you have a Tri-Band and not just a Dual-Band Phone. The truth: the first two frequency ranges are NOT used here in the US. In reality you have a single band phone using 1900MHz here in the US. The other frquencies are used outside the US.

That said, it is particularly important that you obtain the correct frequency antenna for use for your application. since the cell site is looking for a phone sending on the frequency range it is sending out.

Notice how the cell site (A) sends out in the specified frequency range and the appropriate phones send back in that same frequency range.

This is particularly important for fixed applications such as a home or office. The frequency range that your phone uses in your home or office does not change . If you are travelling around in your car and moving from city to city, a dual band phone may switch to the other frequency range(band) without you even noticing it. The cellular system and your Dual Band phone were designed to make this switch (handoff, see below) seamlessly. There is NO indication to the user exactly which frequency you are using.

The only way to find out which frequency range you will be using at your home or office is to call the carrier (AT&T, Sprint, Verizon, etc) and ask their tech support or customer service people. Also, Go here for more tips on contacting your carrier about this.

For mobile applications (and some fixed) a dual band antenna should be used to ensure that you have both frequency ranges(bands) available to your phone. However, if you select for example a 1900MHz antenna for your home area and you roam to another system which is 800MHz your phone will get NO reception while hooked up to an external antenna. A Dual Band antenna for mobile applications is the best and most common selection.

How the Cellular System Works

Let's look at frequencies from a different perspective. Each Carrier (AT&T, Verizon, Sprint, etc.) uses their own (no sharing!) cell sites. If you are in one location, chances are you are being blanketed by three or four carriers even though you are only concerned with one. Take a look at this example:

Let's just say you have a phone and plan that works with Carrier 4 . Your phone, from where you are, is in the carrier's cell (purple area) site using 800MHz. The cell site is to the east of you. Can you use the cell sites of the other carriers? NO , more than likely your phone is not compatible and you do not have a contract (service) with the others. However, if your friend visits you and he has a phone with service from Carrier 1 , he will get good reception though he will be on his carrier's cell site to the west . This is particularly important to understand when looking at fixed application antennas.

Let's get back to your Carrier #4 . Take a look at this illustration:

Here we have removed all of the other carriers to show the system that your phone uses, Carrier 4 .

Notice that with a dual band phone you can move from Point A (Cell Site 1) using 1900MHz to Point B (Cell Site 2) still using 1900MHz and then on to Point C (Cell Site 3) where your phone has switched to 800MHz . However, if you are using your phone in a fixed location, say within the area of Cell Site 4, you would ALWAYS be using 800MHz and it would never change unless the carrier changes it (VERY RARE) or you change carriers, equipment and change your mobile number. As an aside, we could make three more illustrations just like the one above. Each carrier's illustration would overlay the other carrier's system. So for round figures, we could say that if there are four carriers and to cover the above area takes four cell sites, you could probably locate 16 cell sites covering this area. Remember, each carrier uses their own cell sites to comprise their system. So if you had a master map you could identify the location of each cell site and who it belongs to. This information is VERY DIFFICULT to come by. The carriers are VERY protective of this information due to competition.

As another aside--Notice how each Cell Site covers a specific area and is at a specific frequency range. These areas are known as Cells . This is where the term Cellular comes from. See how the cells do not overlap by much at all. This is done to maximize coverage for the specific area without wasting signal for areas already covered. The cell sites use sophisticated switching equipment to transfer your phone call from one cell site to the next. This is called a handoff . As you get too far from one cell site and the call quality becomes unacceptable, the cellular system looks for the next cell site and frequency to hand your call off to. All of this happens in split seconds and is not obvious to the user.

Continue to Next Page

Back to previous page

Back to learning index

Cellular PCS GSM antennas, repeaters, amplifiers, connectors and adapters
tlwhite
We gladly accept Visa, Mastercard, American Express and Discover. Our members only section

This Site Copyright ©1996-2011 Criterion Cellular. All Rights Reserved. Some logos and graphics used are trademarks of their respective owners. Prices subject to change without notice. Not responsible for typographical or photographical errors. Some products may not be available in all areas. All prices are in US dollars. We reserve the right to modify product pricing and/or specifications without prior notice. We do not sell or rent our customer information - Privacy Notice. Site questions / comments / problems mail to Webmaster

Warehouse Locations throughout the US

.

Home

Antennas

Amplifiers

Adapters

Repeaters

Car Kits

2.4 - 5.8 GHz

Components

Company

Learning Center

Criterion Cellular antennas, Cingular repeaters, amplifiers, Verizon boosters, adapters, cables and signal extenders for Sprint Nextel

Verizon, AT&T, Nextel & Sprint Reception Experts Since 1990

Click Here to Checkout View Cart Contents - Click Here
Comodo SSL Certificate
 

Home

 

What's New

 

Specials

 

Clearance

 

Antennas

 

Glass Mount Antennas

 

Magnetic Mount Antennas

 

Panel Antennas

 

Omni Ceiling Mount Antennas

 

Yagi Antennas

 

1900MHz Grid Antenna High (18dBi)

 

1900MHz Grid Antenna Ultra (24dBi)

 

Nextel Antennas

 

Help

 

Cellular, PCS, Dual Band Amplifiers

 

Amplifier Installation Help

 

--

 

Mobile Repeater

 

Main Page - Index

 

Audiovox (UT Starcom)

 

Ericsson-Sony

 

Handspring

 

HP

 

HTC

 

Kyocera

 

LG

 

Motorola

 

NEC

 

Nextel

 

Nokia

 

Novatel (Merlin)

 

Palm (Handspring)

 

Panasonic

 

Pantech

 

Samsung

 

Sanyo

 

Seimens

 

Sierra Wireless

 

UT Starcom

 

---

 

Connectors

 

Connector Adapters

 

Cables

 

Repeater Main Page-INDEX

 

.

 

--- SMALL REPEATERS 1,000-5,000 Sq. Ft. ---

 

Spotwave Mini Repeater System 1900MHz

 

CM - Dual Band Repeater - Home Office (850-1900MHz)

 

DA - Dual Band Repeater -Small Office (850-1900MHz)

 

.

 

--- MEDIUM 30-50,000 Sq. Ft. ---

 

CM - PCS GSM Repeater 1900MHz

 

CM - Cellular Repeater 850MHz

 

CM - Dual Band Repeater (850-1900MHz)

 

CM - Nextel iDEN Repeater

 

.

 

--- X-LARGE 50-75,000 Sq. Ft. ---

 

C6 - PCS GSM Repeater 1900MHz

 

C6 - Cellular Repeater 850MHz

 

C6 - Nextel iDEN Repeater

 

C6 - Dual Band Repeater (850-1900MHz)

 

.

 

-- CUSTOM DESIGNED REPEATERS -

 

Custom & Larger Repeater Systems

 

.

 

--- EXTRAS / EXPANSION ---

 

Repeater Upgrades - AddOn Antennas

 

Lightning Protection

 

Cables

 

---

 

Mobile Repeater

 

Repeater Tutorial

 

Handsfree Car Kits

 

CARK-91H

 

2.4-5.8 GHz Panel Antennas

 

2.4 GHZ Grid Antennas

 

Splitters/Power Dividers

 

Directional Couplers

 

Lightning Protection

 

Bulk Coax Cable

 

Connectors for Coax Cable

 

Tools for Coax

 

--

 

Pre-Made Cables

 

About Us

 

Contact Us

 

Site Map

 

---

 

Privacy Policy

 

Security

 

Return Policy

 

Shipping

 

Ordering Options

 

International

 

Site Help

 

----

 

Customer
Testimonials

 

Repeater Tutorial - Start Here

 

----

 

Before You Buy - PLEASE READ

 

Installation Instructions

 

Antenna Patterns

 

Interior Spaces

 

Repeater Issues

 

Repeater Differences

 

FAQ's

 

----

 

Start Here

 

Reception Basics

 

Bands & Frequencies

 

What's Gain

 

Determining Frequency

 

For your Home

 

For your Car

 

Index